Handling and storage of diesel generator sets：
1. The unit and other electrical equipment generally have packaging boxes.
2. During handling, attention should be paid to fixing the lifting steel cable to the appropriate part of the machine, and lifting it lightly.
3. When hoisting the unit for installation, first connect the protruding lifting points on the chassis, and then check whether it has been firmly hung, whether there are cracks in the welding place, whether the bolts are tightened, etc.It is recommended to use a crossbar for lifting, to prevent the machine from touching the installation point should be in the center of gravity (close to the engine) rather than the center of the whole machine, so that it can be hoisted vertically.
4. Once the machine leaves the ground, a guide cable must be used to prevent the wire rope from kink or the machine from swaying.When the unit is put down, it should be placed in a place that is stable and can carry the weight of the generator.If the generator is hoisted, a single-point suspension device should be installed. Standard machines with a canopy already have a single-point suspension device.。
5. When the unit is shipped to the destination, if it needs to be stored, it should be placed in the warehouse.If there is no warehouse, it needs to be stored in the open air.
6. Raise the box body to prevent rainwater erosion, and the box should be covered with a canopy cloth to prevent sun and rain from damaging the equipment.
Comler Power Group is mainly engaged in the production, design and manufacture of high-end generators.Its key core component is the engine.Engine brands can be Cummins, Platinum, Volvo and other brands, and well-known Chinese brands such as Weichai, Shangchai, and Yuchai can be selected.The quality is guaranteed, the operation is stable, and it can provide you with stable power.Relieve the distress of lack of electricity! Comler is a brand that creates value for customers, and hopes to work with you hand in hand!
