How to operate the daily maintenance of the silent generator?What should I pay attention to during daily maintenance?Where does it need to be maintained?Today, the generator manufacturer will take you to understand the daily maintenance problems of silent generator sets.
Maintenance of oil filter for silent generator：
The oil filter of the silent generator set should be maintained in time, and the opening pressure of the safety valve should be correctly adjusted to 0.35-0.45MPa.If the safety valve spring is aging and the valve seat and steel ball are not tightly sealed, the oil will leak a lot and cause the oil in the oil tank to foam.At this time, you can see the foam oil by pulling out the dipstick.Therefore, the oil must be replaced on time, and the oil filter must be ensured.
The correct use of the cleaner.
When the engine oil filter is clogged and the oil cannot pass smoothly, the safety valve on the filter base will open, so that the oil can directly enter the main oil channel without filtration.However, if the opening pressure of the safety valve is too high to be opened in time, the internal leakage of the oil pump will increase, and the oil supply to the main oil channel will be reduced, and the oil pressure will decrease accordingly.
Oil pump maintenance for silent generator：
Some gear pumps have very low roughness on the joint surface between the pump cover and the pump body. Generally, the original design does not add gaskets, but if other paper gaskets are added during maintenance, the end face gap of the gear will increase, and the oil output of the pump will be reduced.However, there is a washer at the junction of the pump and cylinder.If it is missing, the pressure oil of the oil pump will leak, causing the oil pressure to drop.
Some rotor pumps have chamfering on one side of the outer rotor and no chamfering on the other side. If installed in reverse, the oil output can be reduced by 40%-60%.When the radial gap and end face gap of the gear or rotor are too large due to wear, it will lead to undesirable consequences.If the oil output of the pump decreases and the oil pressure drops, the repaired oil pump should be placed on the test bench to adjust the opening pressure of the pressure limiting valve to keep it between the pressure difference it should have.If the pressure is too high, it will accelerate the wear of the oil pump; if the pressure is too low, it will cause the pressure of the main oil channel to drop.When maintaining the silent generator oil pump, the oil should be filled first to avoid air in the pump and the oil cannot be sucked in. The connection between the oil pump and the suction cup should be sealed.If the air leaks, the oil output of the oil pump will be reduced.
Comler generator manufacturers remind you to maintain the silent generator in accordance with the correct maintenance methods in order to ensure its normal use and extend the service life of the silent generator.
Comler Power Group is mainly engaged in the production, design and manufacture of high-end generators.Its key core component is the engine.Engine brands can be Cummins, Platinum, Volvo and other brands, and well-known Chinese brands such as Weichai, Shangchai, and Yuchai can be selected.The quality is guaranteed, the operation is stable, and it can provide you with stable power.Relieve the distress of lack of electricity! Comler is a brand that creates value for customers, and hopes to work with you hand in hand!
